Lavender
Erica
Bella
Phobeb
Nicole
Jack
Kimmy
Abby
Shirly
Amanda
Sophia
Voz
Continous LED Linear Luminaire System - Node Connector

Continous LED Linear Luminaire System Node Connector

        In the actual installation progress, L, T, X connectors are three kinds of installation methods with those node connectors, all individual lamps of linear lighting system connected together and have function of lighting. Compared with other traditional LED lights, this advantage will solve the problem of install in any application.

L T X Node

        During the progress of installation, the central point of the node connector should be suspended by a line to make sure of the stability.

Node - Line

        The distance from one suspension point to the second suspension line is 1000-3000mm. Node suspension to normal lamp suspension is 80-100mm.

Node - 1

Feed-in and feed-out point

        A node connector at least has one feed-in and feed-out point. All 5 wire, 7 wire or 11 wire linear system have reserved feed-in and feed-out point.

X connector

I node connector

        This is a device which makes electrically conductive connectivity between the feed-in point and feed-out point.

I connector

        Using varies node connectors, the lighting system can be assembled and combined in a myriad of variants, fully meeting the respective requirements in terms of design and lighting technology. The structures themselves will define the wiring sequence via the node connectors on site, depending on the application requirements.

        We can design different feed-in and feed-out point according to the customer’s requirement.

L Node Connectors

Node - 2

        1   Right side for feed-in, left side for feed-out.

        2   Central point for feed-in, both side for feed-out.

         3   Left side for feed-in, right side for feed-out.

        Please note: Above three kinds of connection methods, the default is the first one. If any other connection method needed, please contact us.

Node - 3

T Node Connectors

Node - 4

        1   One side for feed-in, two sides for feed-out.

        2   Central point for feed-in, three sides for feed-out.

        3   Left side for feed-in, two sides for feed-out.

        4   Right side for feed-in, two sides for feed-out.

        Please note: Above four kinds of connection methods, the default is the first one. If any other connection method needed, please contact us.

X Node Connector

Node - 5

        1   One side for feed-in, three sides for feed-out.

        2 Top for feed-in, four sides for feed-out.

        Please note: Above two kinds of connection methods, the default is the first one. If any other connection method needed, please contact us.

*In order to ensure safety, all metal components need to connect with ground wire. we already connected the cable. If blank node, please connect to the ground.

Copyright © 2003-2014 elightingcn.com All Rights Reserved.